Blue Ox Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
2011 Winnebago View Motorhome
These items fit your vehicle
2011 Winnebago View Motorhome
Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Textured black powder coat over e-coat shields against rust and corrosion. Mounting bracket for wiring is welded on for a clean look.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
The hitch fit great and looks great. If a disabled vet @ 81 can do it anyone can. Years ago, would finish in time said, but took 2x as long this time. Fourth time putting a hitch on something.
Easy to install and fit perfect.
Perfect fit, easy installation.
First off. Box was all taped together. Did I get something that was returned? There were some small scrapes on the metal and the staples that held the box together, weren’t holding the box together. The tape was.
Second. I watched the video. The pre existing hole that they pull the bolt through before it wiggles down and is pulled through the second pre existing hole is too small. Let me repeat that. The first pre existing hole that the bolt goes through is TOO SMALL!!! The head of the bolt is too big. It does not fit.
Now I have to bring the bolts through the back. A place where you cannot get your hands into.
I did manage to pull two bolts through and attach them to the front existing holes. I cannot get the rear bolts pulled through to the second pre existing holes.
I spent several hours trying and trying. I gave up. My patience was exhausted. I will need to take it somewhere and have the installation finished.
Did anyone check to see if these bolt heads actually fit through the holes. I’m guessing no!
Mike L.
9/15/2025
It sounds like the box might have been damaged in transport, and attempts were made to retape the box. At the end of step 1 in the instructions, Blue Ox states that you might need to use a die grinder (Dremel tool) to ream out or enlarge the bolt holes. We're sorry about the difficulty you've had, you can use the provided link to find a local installer.
Helpful Links
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
4/12/2025
Thank you for your service George! Way to get the job done too, it looks great! You know what they say, you can't rush perfection :)